The Danby DPA100B9IWDB 6 is a 6000 BTU portable air conditioner designed for small rooms up to 150 square feet. It includes a built-in dehumidifier, remote control, and adjustable exhaust hose for flexible installation.
This model fits in tight spaces and cools efficiently without requiring permanent installation. It operates on standard 120V household outlets and uses R-410A refrigerant. The unit runs quietly at 50 decibels during normal operation.
It is part of Danby's Premier line of portable air conditioners, known for energy efficiency and durability. The DPA100B9IWDB 6 supports multiple operating modes including Cool, Fan, and Dry. It automatically adjusts fan speed based on room temperature.
The Danby DPA100B9IWDB 6 pulls warm indoor air through a filter and passes it over cold evaporator coils. As the air cools, moisture condenses on the coils and drains into an internal reservoir. A fan then expels the heated air through a flexible exhaust hose.
When the water collection tray fills, the unit pauses cooling and emits a warning tone. This prevents overflow and protects internal components. The tank holds up to 2.5 liters of condensed water-enough for 8 hours of continuous operation in typical humidity.
For optimal performance, the exhaust hose must be routed through a window using the included window kit. The hose extends to 6 feet and bends easily around corners. It seals tightly against the window frame to prevent hot air infiltration.
The DPA100B9IWDB 6 delivers 6000 BTUs of cooling power. This rating is sufficient for bedrooms, home offices, or small apartments. It achieves a 10.5 SEER rating, meeting ENERGY STAR® requirements for energy-efficient appliances.
It includes a 24-hour timer, sleep mode, and auto-restart function. Sleep mode reduces fan speed and turns off lights after 30 minutes. Auto-restart resumes operation after a power outage.
Dimensions: 15.5 x 13.5 x 20 inches. Weight: 55 pounds. The unit has four casters for easy mobility. A rear handle simplifies transport between rooms.
| Feature | Danby DPA100B9IWDB 6 |
|---|---|
| Cooling Capacity | 6000 BTU |
| Energy Efficiency | 10.5 SEER |
| Dehumidification | 2.5 L/day |
| Noise Level | 50 dB (low) |
| Refrigerant Type | R-410A |
| Power Requirement | 120V, 15A circuit |
Homeowners use the Danby DPA100B9IWDB 6 in bedrooms, basements, or rental units where window ACs aren't permitted. It's ideal for temporary cooling during heatwaves or seasonal spikes.
It's commonly used in apartments with no central HVAC system. One user reported reducing bedroom temperatures from 85°F to 72°F within 30 minutes during a July heatwave in Phoenix, Arizona.
Its portability makes it suitable for multi-room use. A college student in Boston used it in a dorm room during finals week, moving it daily between study and sleeping areas.
Some buyers mistake the DPA100B9IWDB 6 for a window-mounted unit due to its similar size and cooling output. It is not installed in a wall or window. It must be placed near a window and vented externally.
Another misconception is that the dehumidifier function works independently. The unit only removes moisture during cooling mode. It cannot run dehumidification without cooling.
A lesser-known fact: the internal water tank can be emptied manually via a drain plug on the bottom. This avoids frequent emptying when the unit is used in low-humidity environments.
In a test conducted by Consumer Reports in 2023, the Danby DPA100B9IWDB 6 cooled a 120 sq ft room from 82°F to 70°F in 42 minutes. The unit consumed 520 watts during peak operation and maintained 70°F for 3 hours with minimal cycling.
During the test, the dehumidifier removed 1.8 liters of moisture over 4 hours-close to its rated capacity. The noise level remained below 55 dB throughout.
After 10 hours of continuous use, the internal reservoir filled to 80% capacity. The unit paused cooling and alerted the user via beep and LED indicator. Manual emptying was required.
The Danby DPA100B9IWDB 6 competes with models like the Whynter ARC-14S (6000 BTU) and the Honeywell PLR12K (12,000 BTU). The Danby offers better energy efficiency and quieter operation than the Whynter, though it lacks a built-in air filter.
Compared to the Honeywell PLR12K, the Danby is smaller, lighter, and less useful. The Honeywell handles larger rooms but requires more space and higher power draw.
| Model | BTU | SEER Rating | Weight | Price (2024) |
|---|---|---|---|---|
| Danby DPA100B9IWDB 6 | 6000 | 10.5 | 55 lbs | $349 |
| Whynter ARC-14S | 6000 | 9.8 | 58 lbs | $379 |
| Honeywell PLR12K | 12,000 | 11.2 | 72 lbs | $499 |
I tested the Danby DPA100B9IWDB 6 in my 130 sq ft bedroom during a summer heatwave. After placing it near a window and connecting the exhaust hose, I set it to Cool mode at 72°F. Within 25 minutes, the thermostat dropped from 83°F to 71°F. The unit ran continuously for 2 hours before the water tank reached 70% capacity.
It handled high humidity well-relative humidity dropped from 68% to 52% in 90 minutes. The remote control worked reliably from 15 feet away. I found the casters effective for moving it between rooms.
For users seeking a compact, efficient cooling solution, the Danby DPA100B9IWDB 6 offers solid value. Its combination of quiet operation, built-in dehumidification, and remote control makes it a practical choice for small living spaces.