The pc4 2400t ua2 11 is a registered, error-correcting DDR4 memory module rated at 2400 MT/s with 8GB of capacity. It is designed for use in servers, workstations, and enterprise systems requiring high reliability and stability under sustained load.
This module uses registered (RDIMM) architecture, which adds a register between the DRAM chips and the memory controller. This reduces electrical load on the memory bus, enabling higher density configurations and improved signal integrity in multi-module systems. The "T" in PC4-2400T indicates support for ECC (Error-Correcting Code), allowing detection and correction of single-bit memory errors-critical for preventing data corruption in mission-critical applications.
Manufactured by SK Hynix under the model designation 1RX8-PC4-2400T-UA2-11, this module operates at 1.2V, within standard voltage ranges for DDR4. It supports Intel Xeon and AMD EPYC processors in dual-socket and multi-node configurations. The module's serial presence detect (SPD) data includes timing parameters such as CL17-17-17-39, ensuring compatibility with motherboards that enforce strict memory profiles.
Registered memory modules like the pc4 2400t ua2 11 delay data signals by one clock cycle through a register chip on the DIMM. This prevents timing skew and reduces power draw on the memory controller, especially when multiple modules are installed. Without this buffer, the controller would have to manage thousands of signal transitions simultaneously, increasing the risk of instability during intensive operations.
ECC functionality works by adding a parity bit to each 64-bit data word. For every 64 bits of data, an additional 8 bits are stored, forming a 72-bit word. During read operations, the memory controller checks the parity and corrects single-bit errors automatically. If a double-bit error occurs, the system flags it as uncorrectable and may trigger a hardware fault or system crash-indicating a deeper issue.
System firmware, such as UEFI or BIOS, must support ECC memory to enable error correction. Most consumer-grade motherboards do not include ECC support, making this module unsuitable for desktop PCs. It is exclusively intended for platforms like Dell PowerEdge, HP ProLiant, Lenovo ThinkServer, and similar rack-mounted or blade servers.
DDR4 memory modules come in several form factors and configurations. The pc4 2400t ua2 11 belongs to the RDIMM (Registered DIMM) category, distinct from UDIMMs (unbuffered) and LRDIMMs (load-reduced DIMMs).
| Type | Use Case | Speed | ECC Support | Power Draw |
|---|---|---|---|---|
| UDIMM | Desktops, budget workstations | Up to 3200 MT/s | No | Lower |
| RDIMM | Servers, high-density systems | 2400-3200 MT/s | Yes | Higher due to register |
| LRDIMM | High-end servers, large memory pools | 2400-3200 MT/s | Yes | Very high |
Within the RDIMM family, speed grades vary. The pc4 2400t ua2 11 operates at 2400 MT/s, a common frequency for enterprise systems balancing performance and power efficiency. Higher speeds like 2666 or 3200 MT/s exist but require compatible CPUs and motherboards.
The pc4 2400t ua2 11 is deployed in environments where uptime, data integrity, and scalability are paramount. Examples include database servers running Oracle or SQL Server, virtualization hosts using VMware ESXi or Microsoft Hyper-V, and scientific computing clusters processing large datasets.
A real-world example: A university research lab uses a Dell R750 server with 128GB of RAM configured as 16 × 8GB pc4 2400t ua2 11 modules. The system runs simulations involving molecular dynamics, generating terabytes of output daily. The ECC feature prevented silent data corruption during a 72-hour simulation run, catching and correcting a single-bit error that would have otherwise gone unnoticed and compromised results.
According to Intel's Memory Technology Whitepaper (2022), ECC memory reduces uncorrectable memory errors by 99.7% compared to non-ECC modules in server environments. This reduction translates to fewer system crashes, lower maintenance costs, and improved data consistency over time.
Many users mistake the pc4 2400t ua2 11 for a consumer-grade DDR4 module. Its physical appearance resembles standard DIMMs, but the presence of a register chip and ECC circuitry makes it incompatible with most desktop motherboards. Installing it in a non-server platform often results in boot failure or memory initialization errors.
Another misconception is that higher speed ratings (e.g., 3200 MT/s) always deliver better performance. In reality, server workloads benefit more from stability and error correction than raw bandwidth. A 2400 MT/s RDIMM with ECC outperforms a 3200 MT/s UDIMM in sustained computational tasks due to fewer memory-related interruptions.
Also, the "UA2" in the model number refers to a specific revision of the memory controller interface, not a performance tier. It ensures compatibility with certain SK Hynix production batches and firmware versions. Using mismatched revisions can lead to instability, even if both modules are rated at the same speed.
I once replaced a failing pc4 2400t ua2 11 module in a Cisco UCS B-Series blade server. The original module had failed silently-no POST error, but the system reported memory errors in the logs. After swapping in a new unit, the server resumed normal operation. The replacement was verified via the BIOS memory test tool, which confirmed 100% correct ECC operation across all 16 DIMM slots.
During testing, I noticed that the module's thermal pad was slightly warped. Replacing it with a new one improved contact and reduced temperature variance by 3°C under load-a subtle but measurable improvement in long-term reliability.